surfking Motor Just got this home yesterday, thanks to Rich & Chriss down at Clutton, bristol. Crank balance Lightend Flywheel Barreles Skimmed & Honed Head Skim & Valve recut 749 Gear Box Sigma Slipper Over size Pullys Then all other bitts and that.
surfking Out of Hibernation Just had the Loom remade to fit from the S4RS very nice job looks like it came out of the factory. (cable ties not staying)
surfking dudlington wroteWhat ECU are you running (S4rs) ? My Testerstretta engine was pretty tight packaging.Yep using S4RS it's tucked up in the tray under the seat, will be getting flashed and & rewritten. Nick
dudlington Surfking Where are the bearings for the swinging arm pivot mounted , in the block or swinging arm ???.
surfking dudlington wroteSurfking Where are the bearings for the swinging arm pivot mounted , in the block or swinging arm ???.In engine block.
surfking 888/S4RS NEMESiS Just having this Nemesis fitted, could not clear the OEM unit down stuck fault apprently.
jsedacca Not sure if you mentioned it in the thread, but what frame bolts did you use to secure the engine?
surfking Steben wroteBikes looking great, is that an aftermarket seat unit? By who ? Pleased?Not sure, got it second hand, on the old Ebay. Nick
surfking jsedacca wroteNot sure if you mentioned it in the thread, but what frame bolts did you use to secure the engine?If I remember I think they were 10mm Nichols bolts from the States.
surfking stiglarsenDK wroteGetting it ready this season ? Racing ?Well its for the road, was the plan, but I will admit to thinking of a track day bike. But no racing. Nick
surfking Engine BHP Morning So this has been on the rolling at JHP when I had the engine rebuilt three years ago I had a very mild tune done, compression on the cylinders and porting on the heads. Nothing else, other than a 748 G/Box.
