nedkelly
I am trying to access the plumbing inside the fuel tank on a 92 851. After unscrewing the cap and the 8 or so grub screws on the lower spill plate, the spill plate wont pull out. Is there a trick to removing this, it wont lever up although all the grub screws have been removed and doesnt appear to rotate. Any help appreciated, thanks!
nedkelly
disregard as worked it out, all it needs is a couple of hours soaking with wd40 through the grub screw holes and around the rubber top seal, and then put a hammer head through the hole and pull! It seems the green o-ring drys out and rusts itself in and is difficult to get out. thanks.
