Here you go a few more parts + relisting a couple of parts
Some of the more obscure parts are:
Early allloy Tricolore/851 tank cap complete with new sealing rubber and key
Second outer section only - Diameter is 120mm and fixing centres are 103mm - I believe this is also Paso fit
Corse brake side billet rearset mounting
Corse alloy racing footpeg - 17mm dia. 44mm peg "insert" section longer to allow brake pedal or non race gear shift mounting. Alloy peg is 73mm excluding nylon end cap
Tricolore and very early 851 alloy bracket that sits inside seat section at the rear and the indicators fit into this piece.
Genuine period carbon endurance light pods with recently sourced projector lamps that will fit. £250.00 plus some post
Alloy side stand with alloy bracket complete with new side stand switch
Later bar switches - pair
Earlier bar switch stop/start only
Ignition switch and key
Sprocket carrier - all good standard 17mm with spacers, perfect cush drive pins and good alloy 39t sprocket
Front spindle - standard 17mm with working speedo drive
Standard Tacho - good condition
Radiator fan
New unused standard clock surround foam
Other parts should be self explanitory but any questions please ask
Thanks Guy851
Drop me a PM if interested
