Instrument harness - may be 51011051A ?

stiglarsenDK

Hi, having almost completed the 916R harness set to be used on the 888Racer project, but missing the instrument cable... it may be 51011051A, but not 100% sure... The main harness (51011161A) has a 10 pole male connector...ref 2'nd picture

Anyone our there ? Also a picture would help.

grazie mille

dudlington

Nice work...............I know where to come in the future for cable harness work. How are your hourly rates ????

stiglarsenDK

dudlington wroteNice work...............I know where to come in the future for cable harness work. How are your hourly rates ????

This is not home work... NOS 916R main harness, small bits sourced second hand..

Now , who has the missing instrument cable ? 😳

JSR29

Good luck. I'm going to guess that the main harness you have is designed to plug into a Magneti Marelli race dash. I don't know what sort of dash you are planning for your 888 but you probably are going to have to resign yourself to figuring out what circuit the individual pins are for and constructing a dash harness yourself to fit your 888.

stiglarsenDK

JSR29 wroteGood luck. I'm going to guess that the main harness you have is designed to plug into a Magneti Marelli race dash. I don't know what sort of dash you are planning for your 888 but you probably are going to have to resign yourself to figuring out what circuit the individual pins are for and constructing a dash harness yourself to fit your 888.

Im not sure what dash was used for this main harness, and hope someone could tell me.. Im planning to use an electronic white face tach and std temp gauges ..

JSR29

Actually, I just looked it up and 51011051A is the correct part number for the dash harrness and looks like it would be for the analog gauges. probably wouldn't be hard to make if you can't find one.

stiglarsenDK

JSR29 wroteActually, I just looked it up and 51011051A is the correct part number for the dash harrness and looks like it would be for the analog gauges. probably wouldn't be hard to make if you can't find one.

Thanks... will keep looking for that code, while preparing the bits to make one...

Would anyone have the diagram or even just some fotos etc ?

grazie mille

stiglarsenDK

10 pol mil spec

JSR29 wrote[ATTACH]12209[/ATTACH]

Thanks

Found the 10 Pol Mil Spec Female connectors... so i guess making the rest should be doable from here...