i see on fb page a post about 888's ohlins rebulding.
dust seal,piston,piston seals,spring,nuts and other minor parts are avaible from:
http://www.lanci-suspension.com/
you can check in the main catalogue and search the parts.
after that,send an email to emiliano lanci.
this guy can send on worldwide.
main catalogue are here:
http://www.lanci-suspension.com/prodotti/product.php?pid=864#
click on blue write "QUI" where is wrote "prezzi ricambi & olio",there is a word file
dust seal are from "ARS",like the original one.
this guy has got the bushing(avaible from panigale sbk and desmosedici gp machine who use 42mm ohlins fork)
item are very expensive,and i found a economic way.
http://www.alcotech.eu/
alcotech has got the lower bushing,with od47mm,id42mm and th 20mm.
is the standard lower bushing.
upper bushing is od46mm id42mm and th 20mm
from the lower bushing you can create the upper bushing,turning it.
who bought the new ohlins item can find only a modify upper bushing:
id42mm,od46mm and th 15mm
for the upper bushing there is no problema,but for the lower you must create a holder for this new bushing.
technical drawing is here:
http://imgur.com/0SIC9lc
oil seal:
i find the nok item here:
the correct code for our fork are:
PF425410
id42mm
od54mm
th 10,5 /11,5
you can find it here:
http://www.rinolfi.it//imgART/NOK.pdf
page 2
i find also"ARS" item,but for me they are more expensive and leak in smal time.
i've got the "NOK" item on my bike from 2008,no leak untill today 😝
main bearing in the cap are standard "ina" or "skf" item.
blu nuts are like the standard ohlins FGR fork,M17 x 1 type.
all o ring are standard item,someone metric type,someone imperial type.
easy to find.
stickers are no longer avaible in italy,i ask everywhere 🙁(((
i bought a pair of copy from giovanni caruso,on ebay.co.uk
not bad,slightly smaller than the original one,but ok
ciao
tiziano
