freqrider
How the heck do you remove the (green) injectors from the throttle body without destroying them? I don't want to force them too much for fear of breaking them! Is there a proper tool, technique? I want to get them cleaned since I found some rust in my (spare) tank. Damn ethanol! Pump, filter was clogged. Want to make sure injectors are clean.
griff851
They’re in tight hey. The oring holding them in is a good firm-hard push fit with a new oring and not something to look forward to pulling out, let alone an aged hard oring. I soaked them with CRC and left them a day. It helped once they started moving. Gentle prying around and twisting getting them moving and care. I used a bit of Perspex with a chisel edge and a curve. Move up to metal pry tools only when despair sets in. It’s plastic with metal core so you’d have to be going some to snap one.
tboooe
I just wrapped the injector head with a microfiber cloth, then used some pliers to twist and pull them out. They are tight though as mentioned.
