Standard SP4 exhaust can finish

tubbylad

Hello again all.
Seeking feedback of the collective please.
Can any one describe or post pictures of the factory finish on SP4 cans please.
Looks like some one has taken the Solvol Autosol to mine as they have a shine and the usual flat anodised grey finish is absent.
All part numbers / markings present and correct with no evidence of straps or rivets having ever been removed.
Thanks

Bridgland

tubbylad wroteHello again all. Seeking feedback of the collective please. Can any one describe or post pictures of the factory finish on SP4 cans please. Looks like some one has taken the Solvol Autosol to mine as they have a shine and the usual flat anodised grey finish is absent. All part numbers / markings present and correct with no evidence of straps or rivets having ever been removed. Thanks

https://youtu.be/WqLNNSb620g

Have a look at the Duke of Richmond's original SP4

lakeman

Hello
I'll put a couple of photos of my originals mufflers!
I hope to help you

Speedmade

I had a set of SP2 mufflers that I pulled apart and used a scuff pad to put nice grain finish back on them and then had them re-anodized

glenn Twite

Nos

Pretty good example Gents.

tubbylad

Now that's what my cans look like ... a linished type finish however mine have been polished.
Looking at other examples the cans seem to be smooth with dull grey anodized finish.
Does it mean this linished finish and smooth are both original finishes (both anodized)?
I have the option to polish out the linish marks or anodize what I've got.
Does anyone with an original unmolested SP4 have some feedback they can share please.
Thanks

dudlington

This has been discussed before but should give you some tips if you want to bring the standard finish back to original.

http://www.ducati851and888.com/showthread.php?6810-cleaning-up-cannisters