stiglarsenDK Have had these on the shelves for years, but not sure what they are.. any leads ? Fits in 900/888 yokes Aprox 65 mm longer than a 888 fork No adjustment options of any kind Takes a smaller front axel , only screws in one side Thanks
brad black marzocchi 40mm, look like ss triples, etc, but they would be the same length as 888 and should have a pinch and insert for the lh axle clamp.
stiglarsenDK Yes yokes in fotos from 900/888 Upper yoke 50mm Lower yoke 54 Tubes 40mm (SS and 888 has 41)
econti 40mm is some 600ss, fairly certain they are longer than 888 (at least they look it on mine) but as Brad said bottom bolt area is different. I'd be fairly confident you can just sell them to suit a 600/750ss if that's what you're after
Darkness nine16 wroteCagiva Elefant?Not a 90s Elefant. Most didn't have upside down forks, and those that did had a forward offset axle.
Darkness stiglarsenDK wroteRef foto 1.. 00 = 2000 i recon.. other stamps ?? Thanks guysBy 2000 Ducati were using 65mm Caliper bolt spacing and plastic Mudguard ties on Monsters and others, so these fork legs look to be for something older, even If cast in 2000.
