plastic caps and screws

fsalvatore75

Hi,
I'm searching 2 or more small plastic caps for the undertail and the 2 lateral screw of the triangular belly pan of my 888 SP5.

Does anybody have them to sell?

Thanks a lot.
Fabio

Bridgland

Fabio,

Is this the bolt to retain the V section shielding the oil cooler between the 2 side fairings? If so, I believe you will find them to be captive threaded bolts bonded into the fairing either side, and you just put nuts and washers onto them. It's a bit hard to make out where on the bike those holes are.

Chris

fsalvatore75

Bridgland wroteFabio, Is this the bolt to retain the V section shielding the oil cooler between the 2 side fairings? If so, I believe you will find them to be captive threaded bolts bonded into the fairing either side, and you just put nuts and washers onto them. It's a bit hard to make out where on the bike those holes are. Chris

Hi Chris,
thank a lot.
Yes are exactly that 2 screws.
I will try to follow your suggestion, but if anybody have the originals I will prefer! :-)
Thanks.
Fabio