+ Reply to Thread
Page 2 of 2
FirstFirst 1 2
Results 11 to 12 of 12

Thread: Project 2

  1. #11
    Join Date
    Aug 2007
    Location
    Cornwall S.W. England
    Posts
    5,067

    Default

    You could try contacting Pistal direct,
    Omega's also made pistons for the 926's,
    Kamna in Germany supply Pistal's,
    CP's in the States will make a set of four pistons to your design/drawing,
    As will JE but the quality's not as good as CP's,
    JHP/Coventry Ducati will probably be able to help you, but expect to pay top $ with them.

    However you will need a pair of either 916SP or 916SPA barrels for the pistons.
    Or...
    Fox Engineering in the States can supply steel liners for your bored out 94mm barrels.
    But if it comes to that barrel liners aren't that expensive to buy here in the UK, they come it at around 20 each.
    I'd go for 916SP barrels bored out to 96mm and replated by Langcourt's in Weston SuperMare.
    If you go down this route, ping me a PM as I can give you a few reliability tips for this modification.

    Steve R

  2. #12
    Join Date
    Aug 2008
    Location
    Glos,England
    Posts
    405

    Default

    Quote Originally Posted by Mr.R View Post
    You could try contacting Pistal direct,
    Omega's also made pistons for the 926's,
    Kamna in Germany supply Pistal's,
    CP's in the States will make a set of four pistons to your design/drawing,
    As will JE but the quality's not as good as CP's,
    JHP/Coventry Ducati will probably be able to help you, but expect to pay top $ with them.

    However you will need a pair of either 916SP or 916SPA barrels for the pistons.
    Or...
    Fox Engineering in the States can supply steel liners for your bored out 94mm barrels.
    But if it comes to that barrel liners aren't that expensive to buy here in the UK, they come it at around 20 each.
    I'd go for 916SP barrels bored out to 96mm and replated by Langcourt's in Weston SuperMare.
    If you go down this route, ping me a PM as I can give you a few reliability tips for this modification.

    Steve R
    Thank. You Mr R. That's where I am at th moment got an email back from Pistal with a drawing for 955 pistons so will try them again tomorrow.

    Looking for 916SP Barrels now.

    Many thanks updates as when.
    Surfking

+ Reply to Thread

Similar Threads

  1. frame project
    By duc904red in forum Anything goes
    Replies: 29
    Last Post: 11-02-2013, 01:44 PM
  2. '92 project
    By Tony_Ducati in forum Projects
    Replies: 22
    Last Post: 11-19-2011, 01:35 AM
  3. New project
    By griff851 in forum Projects
    Replies: 10
    Last Post: 07-25-2011, 08:25 AM
  4. New Project
    By marvin in forum Projects
    Replies: 11
    Last Post: 07-10-2011, 03:03 PM
  5. new project perhaps
    By marvin in forum Projects
    Replies: 70
    Last Post: 09-24-2008, 11:53 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts