+ Reply to Thread
Results 1 to 5 of 5

Thread: Looking for a P8 ECU

  1. #1
    Join Date
    May 2010
    Location
    San Diego
    Posts
    11

    Default Looking for a P8 ECU

    Hey guys, I'm looking for a computer for my 1993 888SPO. I spent two years collecting all the parts to build this bike and finally finished yesterday. Can't wait to hear it; turned the key and no pumpeek: . Checked all the connections and tapped on the fuel pump it self, nothing . I tried looking up a wiring diagram to see if it has a pump relay or something, but found nothing. I also checked the four wire plug (black and brown wire) with a multimeter and have no power when /i turn on key. Could it be anything else?

    Mark
    Last edited by ducatirider; 08-12-2010 at 10:35 AM.

  2. #2
    Join Date
    Aug 2007
    Location
    Sweden
    Posts
    157

    Default

    I have a pic saved called "P8 w no fuelpump",
    showing where on the PCB the fault may be.
    PM your mail and I`ll send it if interested.
    Last edited by greenmonster; 08-12-2010 at 02:20 PM.

  3. #3
    Join Date
    May 2010
    Location
    San Diego
    Posts
    11

    Default

    Thank you greenmonster, I will send a pm.
    Mark

  4. #4
    Join Date
    Aug 2007
    Location
    Sweden
    Posts
    157

    Default

    You have mail.

  5. #5
    Join Date
    Aug 2007
    Location
    Cornwall S.W. England
    Posts
    5,067

    Default

    Hi Mark,

    If the ecu is at fault it's possible to wire the fuel pump direct to the ignition switch and bypass the ecu, this way it'll only be running whist the ignition key/switch is turned on.
    This was a common modification on the race bikes back in the days when they were raced.
    It would cost a lot less cash than having the ecu repaired.

    Steve R

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts