+ Reply to Thread
Results 1 to 3 of 3

Thread: Swinging Arm Re-anodising

  1. #1
    Join Date
    May 2017
    Location
    Derby
    Posts
    3

    Default Swinging Arm Re-anodising

    Hi. I have a 91 customer Roche Corse 888. The swinging arm is quite badly marked. I know it would be easier to stove enamel it, but the bike is quite original. Does anyone know of anyone in the UK who can strip polish and re-anodise to look like the original finish. It looks like a standard 888 swinging arm finish.

  2. #2
    Join Date
    Aug 2007
    Location
    Minneapolis, MN, USA
    Posts
    441

    Default

    The challenge you will have is any of the steel inserts. They will need to be removed prior to the stripping process.
    Otherwise it's a fairly straight forward process. I had a set of SP2 muffler sleeves done and they came out perfectly

  3. #3
    Join Date
    Feb 2010
    Location
    UK
    Posts
    8

    Default Try here

    https://www.stchrome.co.uk/

    I've used them for hens teeth parts with no issues.

+ Reply to Thread

Similar Threads

  1. Cordati swinging arm Ducati 888
    By dudlington in forum Technical Forum
    Replies: 7
    Last Post: 10-02-2017, 10:09 AM
  2. WANTED Early swinging arm 851
    By dudlington in forum Wanted
    Replies: 0
    Last Post: 05-27-2017, 06:40 AM
  3. Swinging Arm?
    By 900SL in forum Anything goes
    Replies: 1
    Last Post: 05-06-2017, 12:38 PM
  4. Swinging arm plates...or not?
    By 900SL in forum Anything goes
    Replies: 1
    Last Post: 09-20-2015, 04:52 AM
  5. SWINGING ARM REPAIR...or not?
    By 900SL in forum Technical Forum
    Replies: 3
    Last Post: 06-02-2014, 06:50 AM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts