+ Reply to Thread
Results 1 to 5 of 5

Thread: Clutch slave cylinder rebuild/replace?

  1. #1
    Join Date
    Jul 2008
    Location
    Lancs.
    Posts
    4

    Default Clutch slave cylinder rebuild/replace?

    Any ideas where I can get a rebuild kit for my '89 851 clutch slave. It's dumped fluid all over the cover and taken the satin black off. My fault for leaving it un-loved in a corner

    Or, will a later model fit?

    Or, cut my losses and buy an Oberon or similar

  2. #2
    Join Date
    Apr 2007
    Location
    bakersville, NC
    Posts
    2,823

    Default

    Personally I would just buy an aftermarket slave.

  3. #3
    Join Date
    May 2008
    Location
    UK
    Posts
    133

    Default

    If you don't want to go aftermarket, this chap might be worth a try - http://www.ducatipaddy.com/ The web site says he specialises in parts for bevel Ducati, but he had an overhaul kit for the rear brake master cylinder for my SP3.
    851 SP3 #197
    1198S

  4. #4
    Join Date
    Jun 2007
    Location
    Melbourne, Australia
    Posts
    1,389

    Default

    clutch slave seal is 93040091a.

    oberon is the cheapest of the good slaves ime.
    Brad The Bike Boy

    www.bikeboy.org

  5. #5
    Join Date
    Jul 2008
    Location
    Lancs.
    Posts
    4

    Default

    Thanks guys

+ Reply to Thread

Similar Threads

  1. Brembo clutch cylinder rebuild info needed
    By rxs51 in forum Technical Forum
    Replies: 4
    Last Post: 07-30-2014, 04:24 AM
  2. Will A 916 Clutch Slave Cylinder Fit An 851?
    By 900 Supersport in forum Technical Forum
    Replies: 9
    Last Post: 05-02-2012, 11:55 AM
  3. 851 Clutch slave cylinder failed-help!
    By 900 Supersport in forum Technical Forum
    Replies: 5
    Last Post: 06-11-2011, 08:50 PM
  4. Vented clutch cover/slave cylinder
    By brad black in forum Tricolore Strada and Kit owners
    Replies: 1
    Last Post: 02-26-2010, 09:23 AM
  5. Evoluzione clutch slave cylinder
    By wp906xm in forum Technical Forum
    Replies: 4
    Last Post: 04-28-2008, 12:16 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts