+ Reply to Thread
Results 1 to 4 of 4

Thread: LH switchblock WTB

  1. #1
    Join Date
    Dec 2009
    Location
    Sth Highlands NSW Australia
    Posts
    108

    Default LH switchblock WTB

    Part # 65140021A LH switchblock light and turn needed with the 2 plugs. I have an earlier one without the light switch and the square plug. Any leads out there? Its dark here atm......

  2. #2
    Join Date
    Oct 2013
    Location
    Belgium
    Posts
    696

    Default

    Any leads or any connections ?????..............just joking. I had the same trouble a while ago . loads of earlier types but the twin plug switches are on the Unicorn Poo listing. I was seriously considering swapping over the connectors as you can get those babies. Not a lot of work really and could be your only option. If you need a hand with the colours/pins I could help you there.

  3. #3
    Join Date
    Dec 2009
    Location
    Sth Highlands NSW Australia
    Posts
    108

    Default wireing crt colours pls

    Thanks there. yes a wireing code /crt diagragm would help. The parts manual is not clear.
    email me whittons@ozemail.com.au.....

  4. #4
    Join Date
    Oct 2013
    Location
    Belgium
    Posts
    696

    Default

    Whitto attached is a photo of the 2 connectors and their coloured wiring and also information on how to change over a single connector block over to 2 - 5 connector blocks. The 5 pin connectors are very easy to find on fleabay , you will not need to open the switch as both switches are identical on the inside. Just cut off the single connector and wire accordingly. Hope this helps others as those later switches are getting hard to find and expensive. Should only take a hour or so to convert. I should point out this information is the earlier type , 1 connector with the light switch.
    Attached Images
    Last edited by dudlington; 07-08-2018 at 07:49 AM.

+ Reply to Thread

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts