+ Reply to Thread
Results 1 to 4 of 4

Thread: Front ride height

  1. #1
    Join Date
    Jun 2012
    Location
    Co Durham
    Posts
    10

    Default Front ride height

    Hi, Iím wanting to adjust the front fork height through the top yoke from its current 20mm to the standard 10mm, is there an easy way to do this or is it a full front end strip down?

  2. #2
    Join Date
    Dec 2007
    Location
    Carlisle, UK
    Posts
    608

    Default

    If your talking lowering Forks though yolks then it is quite easy, removed lower fairing support Engine (jack) as it is now then lossen all clamp bolts on yolks and raise jack until Forks slipe down to decided height. Then tighten yolks and job done.
    Hope I have not miss under stud your question.
    Regards
    Paul

  3. #3
    Join Date
    Jun 2012
    Location
    Co Durham
    Posts
    10

    Default

    Hi, yes you have understood my question correct, so if I remove the bottom fairing where do I use the jack, under the engine or somewhere else?

  4. #4
    Join Date
    Oct 2011
    Location
    Vancouver B.C.
    Posts
    161

    Default

    Yes, with block of wood.
    Or use a strap or two from a good ceiling hook...

+ Reply to Thread

Similar Threads

  1. Replies: 12
    Last Post: 02-18-2018, 05:28 AM
  2. 1991 Strada ride height adjustment
    By 900 Supersport in forum Technical Forum
    Replies: 6
    Last Post: 11-24-2015, 03:52 PM
  3. anyone try these ride height adj
    By got2dv8 in forum Technical Forum
    Replies: 10
    Last Post: 02-02-2013, 08:10 PM
  4. ride height
    By huit in forum Technical Forum
    Replies: 0
    Last Post: 04-30-2009, 07:49 PM
  5. ride height adjuster
    By guy851 in forum Technical Forum
    Replies: 7
    Last Post: 01-08-2009, 05:03 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts