+ Reply to Thread
Results 1 to 8 of 8

Thread: Sp5 exhaust headers

  1. #1
    Join Date
    Oct 2017
    Location
    Scottish Highlands
    Posts
    78

    Default Sp5 exhaust headers

    Hi can anyone advise me on the diameter of the original sp5 exhaust headers?? Also photo of bike if possible

    Ta Jack

  2. #2
    Join Date
    Feb 2011
    Location
    Denmark
    Posts
    537

    Default

    Quote Originally Posted by Jack888 View Post
    Hi can anyone advise me on the diameter of the original sp5 exhaust headers?? Also photo of bike if possible

    Ta Jack
    SP (2?) 3,4,5 Headers
    Pipe : 45 mm
    Exit : 50 mm

    Canister 50mm all the way

    Later versions vertical / rear pipe has CF heat shield studs..

  3. #3
    Join Date
    Oct 2017
    Location
    Scottish Highlands
    Posts
    78

    Default

    Quote Originally Posted by stiglarsenDK View Post
    SP (2?) 3,4,5 Headers
    Pipe : 45 mm
    Exit : 50 mm

    Canister 50mm all the way

    Later versions vertical / rear pipe has CF heat shield studs..
    Thanks mate, That's helpful,
    Are the 3, 4 and 5's all exact same or slightly different (interchangeable)?

  4. #4
    Join Date
    Feb 2011
    Location
    Denmark
    Posts
    537

    Default

    Quote Originally Posted by Jack888 View Post
    Thanks mate, That's helpful,
    Are the 3, 4 and 5's all exact same or slightly different (interchangeable)?
    Interchaneable : YES, front and rear section from SPs can be interchanged..

    Exact same ... No, some are missing studs for CF shield (vertical/rear section) and holes for exhaust gas analysis (both sections)

    I belive the GIO GA MOTO can be interchanged as well (see foto of this aftermarked set) This one has better passage @ the joint section ...
    Attached Images

  5. #5
    Join Date
    Oct 2017
    Location
    Scottish Highlands
    Posts
    78

    Default

    Quote Originally Posted by stiglarsenDK View Post
    Interchaneable : YES, front and rear section from SPs can be interchanged..

    Exact same ... No, some are missing studs for CF shield (vertical/rear section) and holes for exhaust gas analysis (both sections)

    I belive the GIO GA MOTO can be interchanged as well (see foto of this aftermarked set) This one has better passage @ the joint section ...
    perfect thanks again for the info, I'm just looking at what options I have as I'm not wanting to go and knacker up low to mid range power, Trying to decide what to replace my small dia strada pipework with

  6. #6
    Join Date
    Feb 2011
    Location
    Denmark
    Posts
    537

    Default

    Quote Originally Posted by Jack888 View Post
    perfect thanks again for the info, I'm just looking at what options I have as I'm not wanting to go and knacker up low to mid range power, Trying to decide what to replace my small dia strada pipework with
    These headers from SIL MOTO comes up from time to time... new or used... (500-800 EUR range)
    Think they are good value for money

    OEM collector cut open .. pic 2
    Attached Images

  7. #7
    Join Date
    Feb 2010
    Location
    Los Angeles, CA
    Posts
    116

    Default I have a set of header pipes

    Bought these - from someone here I believe - a few years ago. I got them for an 851 I sold over two years ago.

    I don't think they are Giaco Moto nor are they spaghetti type, but they are indeed 45 mm diameter. They are ceramic coated in silver and are as new otherwise.

    I'd be happy to sell them. $400.00 and I'll cover shipping in the US.

    Contact me .
    Attached Images
    Last edited by MitchB; 03-05-2018 at 03:10 PM.

  8. #8
    Join Date
    Feb 2011
    Location
    Denmark
    Posts
    537

    Default

    Quote Originally Posted by MitchB View Post
    Bought these - from someone here I believe - a few years ago. I got them for an 851 I sold over two years ago.

    I don't think they are Giaco Moto nor are they spaghetti type, but they are indeed 45 mm diameter. They are ceramic coated in silver and are as new otherwise.

    I'd be happy to sell them. $400.00 and I'll cover shipping in the US.

    Contact me .
    If they have 50mm header connection ? they are very close to the SP5 style .. yet after marked of some sort..

+ Reply to Thread

Similar Threads

  1. Wanted:Complete SP5 exhaust system
    By Jasper in forum Wanted
    Replies: 0
    Last Post: 01-18-2018, 02:44 PM
  2. 1993 888 SP5 RH c/f exhaust
    By pgw in forum Wanted
    Replies: 0
    Last Post: 11-30-2015, 11:20 PM
  3. 851 SP3 exhaust headers
    By sergiomala in forum Wanted
    Replies: 0
    Last Post: 07-03-2013, 02:43 PM
  4. Wanted - 50mm Exhaust Headers/Downpipes
    By dhumphrys in forum For Sale
    Replies: 2
    Last Post: 11-12-2010, 12:23 PM
  5. FS: SP exhaust headers (50 mm)
    By Remquo in forum For Sale
    Replies: 4
    Last Post: 03-05-2010, 02:56 PM

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts