Hi Folks, After having worked on a few sets of the M1r forks, I thought I would post up some detail on what we found. The M1R are an...
One Tail, Brembo seal kits http://www.1tail.com/sa/c/Brembo.htm Bevell Heaven, Gasket kits, Steering head bearings, Fast shipping...
Hi Folk, Been out for great run stopped for coffee now fuel pump not working any ideas Taxi home maybe Cheers Paul
Firstly i would like to say thank you for letting me join your forum. I don't have a Ducati at the moment but have very fond memories of one. I...
Hi, Just wondering is just a few mm clearance between swing arm and sprocket nuts normal?? Everything is spot on but it looks very close. Cheers...
I have got my hands on a NOS Showa Rear shock for an 91 851. I have a 93 888 Strada that I am rebuilding and apart from the part numbers being...
Hi, Was wanting to fit an oil cooler to a strada 888 (no cooler in standard form) and wondered if any ones done this?? Is there doner parts from...
Tried hooking up various Tacho,s to my 888SP4 with 996 SPS engined , twin injector with P8 computer. I,m using the pin 4 on the P8 computer...
Plastic piece under the tail section that holds the turn signals and license plate? Previous owner cut it above where license plate is mounted. I’m...
Is there a website with an online parts look up for the older 888 machines? I have a microfiche but no viewer so it's not doing me much good.
Newbee here, have a 93 888 strada. Just noticed that my side panels where it says ducati 888 demoquattro have a slight variation in the decal color...
I have a 93 Strada. The throttle bodies have end flow injectors and no air bleeds. Will the 916 throttle bodies with side feed injectors and air...
My 888 has a 5.5" rear wheel and a 180/55Z 17 tire. If I put a 6" wheel on it what size tire should I use? Do I have to worry about any clearance...
Is it possible to tell from the photos whether these are aluminum or magnesium? The disk mounting surface sure looks like conversion coat for Mg,...
Hello, This is my first post here so please be gentle with me. ;) I have a 1994 888 LTD that I purchased new. The bike doesn't get ridden but I...
Hello Could some one post a diagram (or a link to one) for the original pipework for the front brakes on a '91 SP3? I think it has one line from...
Hey you guys, Did one of you ever try to install this dash on his bike? ...
Hi can anyone advise me on the diameter of the original sp5 exhaust headers?? Also photo of bike if possible Ta Jack
Good morning everybody. First of all, sorry for my poor english speaking. I'm writing from Italy. I've found this forum while looking for...
Ducati 851 VIN Number is ZDM1EB2RXL00 ; Can I get someone to give me an explanation I am very confused.
Is there any chance that we can open up a registry of the 851/888 that are still alive?
I pulled my heads+cylinders off to check and freshen up with new gaskets, seals and rings. This is the first Ducati engine i’ve ever taken apart and...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules