Hi Folks, After having worked on a few sets of the M1r forks, I thought I would post up some detail on what we found. The M1R are an...
One Tail, Brembo seal kits http://www.1tail.com/sa/c/Brembo.htm Bevell Heaven, Gasket kits, Steering head bearings, Fast shipping...
I just got this lift bench in today, my knee has gone gammy, so squatting and getting on and off the small roller seats beside the old plain steel...
Maybe an odd question, but I thought I would ask anyway. Is it possible and is there any benefit to put twin injectors setup like the SP4/5 on a...
Hello, I'm in the process of setting squish and sorting the compression ratio out. I've measured the combustion chambers and the piston dish...
Hello all, I was recently reunited with my first love... my 1992 851! It's been sitting for 20 years (long story, driven by relocation from the...
Hi all my 851sp3 has just clicked 20000 miles and at last service last yr lad said it was ready for new basket and clutch?! What and which 1 am I...
Anyone see the Corse 926 gears on e bay ? I looked at them but the main and lay shafts did not seem right as per the Racing 1994 manual ? Thoughts...
Does anybody knows a shop where I can order a custom lenght rvs hose for my Ohlins shock remote reservoir? (UK or europe please) I have a DU0060 but...
hi, anyone got a "recent" link and/or recommendation for sintered pads for an 89 851 Race bike please? cheers
hi everyone, i got some questions about my 851 strada biposto '89 replacing the front brake disc rotors, i have to stick to the 5mm thick discs...
Hi Everyone, I've been busying myself with a conversion, making a ST4S swinging arm fit a 851/888. This results in a swinging arm 15mm longer...
Hi Dose the gear selector drum from 916/996 work/fit in 888 cases. thanks
Firstly I do note the huge amount of info within the forum on topic, it just gets a little hard to chase around on a mobile device and am sure...
The wiring on the sensor on my bike is rooted. This is the sensor I have https://farm8.staticflickr.com/7859/46030359554_cfed12289e_b.jpg851...
FWIW. I have been doing maint. on a friends S4RS (Testastretta Monster) She has put 4 or 5 voltage regulators in it. Last time she took it to a...
Hi guys, I have a 1990 registered 851, which has a manufacturing date of 1989 on the frame. Will a windscreen from a 1988 851 fit my bike, as I can...
Hi , wondering if anyone has recently done upgrades to these forks? Building a Period 6 race bike & have to stay within the rules & Regs so cant...
Easy swap... but which engine-frame axles to use? ST4S uses 12mm axles, 888 10mm. Are there Ducati axles that fit a modified 12mm 888 frame? Or do I...
Hi, can anyone please point me in the direction of for where I can source one of these to suit a 1989 851 race bike? cheers
Are the any good alternatives to the 888 starter solenoid? Or is Ducati only?
In case you fancy a hanging rear caliper like SP5 and the racers, use the exacta fit plenty available hanger bracket from a monster (17mm rear axel) ...
Use this control to limit the display of threads to those newer than the specified time frame.
Allows you to choose the data by which the thread list will be sorted.
Order threads in...
Note: when sorting by date, 'descending order' will show the newest results first.
Forum Rules
Help keep Ducati851and888.com running!
